GME14 - Hammermill
this is a Hammermill that will take approx. 1" (25mm) ore and crush it to a fine powder (100-400 mesh).

Price:
Request a Quote
Description:
The GME14 Hammermill is an extremely durable and affordable rock crusher that is design to crush ore down to a fine powder to liberate or free the gold (or other valuable mineral). This Hammermill from Global Mining Equipment has been an on-going project with our resources in East Africa and Nicaragua, we have developed the most productive and yet affordable to Hammermill to run and operate. The enhanced features have allowed for much longer lasting hammers as well as a screening system that is unmatched in the industry.
Features:
- The GME14 Hammermill is an assembled Hammermill rock crusher that is ready to use immediately upon receipt. (Gas and Diesel options need oil and fuel before operation)
- The Hammermill is able to crush material up to 2" (51mm). 1" (25mm) material will increase production as well as reduce wear on the hammers.
- The GME14 Hammermill can be fitted with an electric motor, gas engine, diesel engine or no engine
- The pillow block bearings are the top of the line Split Housing Bearings
- The drive shaft is 2" (50mm)
- The interior disc system is a newly designed patent pending system that will not slip and will accomodate changing the 10 hammers in less than 10 minutes.
- The proprietary screening system is extremely unique and very durable. We are able to cut our screens to fit a specific order; however, our typical screens are 20 mesh (1mm) and 35 mesh (.5mm)
- The Hammermill rock crusher internal wear plates are 3/8" (9.5mm) and are made of a 400 Brinnel Hardness Material. These internal wear plates are long lasting and can be replaced in very little time.
Specs:
- Drive System: 30HP Gas Engine / 24HP Diesel Engine / 15HP Electric Motor
- Height: 53" (1346mm) - with hopper
- Width: 33" (838mm)
- Length: 56" (1422mm)
- Weight: approx. 1,400 pound (635kg)
- Quantity of Hammers: 10 Each (approx weight of each hammer is 8 pounds (3.6kg)
Testimonials
“The GME14-Hammermill has been a perfect fit for our mill. It’s compact and mobile enough to move from tailing pile to tailing pile, and has the capability to run nonstop all day. Exactly what we needed”
-Greg B.
President/CEO Lincoln Mining Co.
“The equipment we bought from Global Mining Equipment has continued to impress us. We wish we could mine as fast as the mill can run.”
-Mark Peterson
President/Peterson Mining & Metals
“These machines are perfect for our recycling operation and the customer service is exceptional! We are on our 6th GME14-Hammermill and have plans to purchase more in the near future.”
-Kenneth Gravitt
CEO/GES Inc.
“The GME10-jaw crusher we bought from GME has been a huge asset to our solid surface recycling program. We now can avoid high disposal fees at our landfill and resell it as landscaping rock.”
-Chad / Owner at Chads Tile and Granite
“We bought both the GME10 and GME14 along with two ORO concentrators. The system GME designed for us has proven to be very effective and runs at a very high production rate for a small scale mill. We couldn’t be more pleased.
-Steve T.
“I bought a cheaper hammermill also made in the USA and had nothing but problems. We couldn’t run more than an hour or two without breaking down and replacing hammers/chain. Eventually the machine literally wore itself out and we were at a standstill. I didn’t have a crusher and had two tons of ore sitting on the ground. Brock told me to bring the ore by and we crushed it with the GME10 and GME14 in a little over an hour. I bought both crushers a week later and haven’t had any problems since. They are true production machines.”
-Nathan Freeze
Owner, IBC Ent.
“Global Mining Equipment has been a crucial part of our business from supplying equipment and spare wear parts in a timely manner to the customer service of actually being able to connect to someone immediately when we need something. Not to mention the equipment is far more superior to anything else on the market that is available in this size.”
James Dobson
CEO, Golden Eagle Mine
“We have now purchased 5 separate full mill sites designed by Global Mining Equipment including the ORO Concentrators. The first two we bought increased our production and recovery by 15% which enabled us to purchase 3 more concessions and 3 additional full mill sites! We highly recommend GME and their services.
Ed Boykin
Mineral and Energy LLC.
“The GME14-Hammermill has been a perfect fit for our mill. It’s compact and mobile enough to move from tailing pile to tailing pile, and has the capability to run nonstop all day. Exactly what we needed”
-Greg B.
President/CEO Lincoln Mining Co.
“The equipment we bought from Global Mining Equipment has continued to impress us. We wish we could mine as fast as the mill can run.”
-Mark Peterson
President/Peterson Mining & Metals
“These machines are perfect for our recycling operation and the customer service is exceptional! We are on our 6th GME14-Hammermill and have plans to purchase more in the near future.”
-Kenneth Gravitt
CEO/GES Inc.
“The GME10-jaw crusher we bought from GME has been a huge asset to our solid surface recycling program. We now can avoid high disposal fees at our landfill and resell it as landscaping rock.”
-Chad / Owner at Chads Tile and Granite
“We bought both the GME10 and GME14 along with two ORO concentrators. The system GME designed for us has proven to be very effective and runs at a very high production rate for a small scale mill. We couldn’t be more pleased.
-Steve T.
“I bought a cheaper hammermill also made in the USA and had nothing but problems. We couldn’t run more than an hour or two without breaking down and replacing hammers/chain. Eventually the machine literally wore itself out and we were at a standstill. I didn’t have a crusher and had two tons of ore sitting on the ground. Brock told me to bring the ore by and we crushed it with the GME10 and GME14 in a little over an hour. I bought both crushers a week later and haven’t had any problems since. They are true production machines.”
-Nathan Freeze
Owner, IBC Ent.
“Global Mining Equipment has been a crucial part of our business from supplying equipment and spare wear parts in a timely manner to the customer service of actually being able to connect to someone immediately when we need something. Not to mention the equipment is far more superior to anything else on the market that is available in this size.”
James Dobson
CEO, Golden Eagle Mine
“We have now purchased 5 separate full mill sites designed by Global Mining Equipment including the ORO Concentrators. The first two we bought increased our production and recovery by 15% which enabled us to purchase 3 more concessions and 3 additional full mill sites! We highly recommend GME and their services.
Ed Boykin
Mineral and Energy LLC.
Gallery
Click on an image below to view full size & scroll through all. Click here to see more photos.